WBK1I1KS41 uses a special isolation module to monitor the AC current in the grid and circuit in real time. When the AC current exceeds the set upper limit, the output exceeds the limit alarm signal, and the output signal is the relay contact signal. The operating limit value of the alternating current can be arbitrarily set within the input range. The input and output of the product are completely isolated, with high precision, high isolation and low drift. It can be applied to motor overload monitoring, power loss detection, motion verification, signal isolation conversion and other occasions.
Hot Tags: power monitoring equipment current switch, China, suppliers, factory, price, Power Monitoring Equipment Current Switch, 10V 1000V Input AC Voltage Monitoring Switch, 4 20mA Current Signal Conditioner
1. Input: AC 0.5A-8A; Output: Rk;
2. Motion error: <Set the AC current limit value ± 2%;
3. Backlash: <Set the AC current limit value -20%;
4. Response frequency: 25Hz ~ 3kHz (sine wave);
5. Response time: 300ms;
6. Load capacity: AC 240V/1A or DC 30V/2A;
7. Auxiliary power supply: DC 12V or 24V;
8. Static working current: <10mA;
9. Working current during operation: <30mA;
10. Isolation withstand voltage: ≥DC 2500V, 1min;
11. Environmental conditions: commercial grade: 0 ° C ~ 50 ° C,
12. Input overload capability:
10 times the nominal input current value for 1 s, interval 300s, repeated 5 times;
13. When the <AC current limit value is set, the relay output contact is disconnected.
When the >AC current limit value is set, the relay output contact closes.
