WBI412H29 (4–20 mA Voltage Sensor 0–10 V Output) converts AC input current into a load-independent DC output signal of 0 V–5 V or 1 V–5 V. It adopts the electromagnetic isolation principle and an average measurement method for real-time measurement of AC current (in any waveform) from the power grid or electrical circuits.
The product offers advantages such as complete galvanic isolation among input, output, and auxiliary power, high accuracy, low temperature drift, and a wide operating temperature range. The product complies with EN61326:2006 and EN60100:2001 standards.
Advantages:
High precision,
High isolation,
Low power consumption,
Low drift,
Wide temperature range,
Strong anti-interference capability.
Applications:
Suitable for current measurement,
Automatic monitoring and control,
Electrical signal detection and modulation,
Data acquisition.
Hot Tags: 4-20mA Voltage Sensor 0-10V Output, China, suppliers, factory, price, 10mV 1000V Input Voltage Transducer, DC Current Transducer 4 to 20ma, DC Voltage Transducer, Current Monitoring Equipment Current Switch, Current To Voltage, 4 20ma Hall Effect Current Sensor
| Item | Specification |
|---|---|
| Input | AC 10V, 50V, 100V, 500V |
| Output | DC 0-5V |
| Power supply | AC/DC 85V-265V |
| Accuracy level | 0.2% |
| Linear range | 0% to 120% nominal input |
| Frequency response | 25Hz ~ 5kHz |
| Response time | 200ms |
| Input impedance | When the measured voltage Ux≥10V, Ri=Ux×1kΩ/V |
| Load capacity | 6mA |
| Output ripple | ≤10mV (effective value) |
| Ambient temperature | -25°C ~ +70°C |
| Temperature drift | 350 × 10⁻⁶ / °C |
| Electromagnetic compatibility standards | EN61326:2006 |
| Safety standards | EN60100:2001 |
