WBI221LY05-25(Split Core Hall Effect Current Sensor) adopts the Hall Effect to measure the AC and DC current of the power grid in real time. Using precision constant current technology and linear temperature compensation technology, Split Core Hall Effect Current Sensor is converted to standard current output, and the characteristics of AC/DC current general-purpose, strong overload capacity and high isolation.
Advantages:
Strong overload capability,
High reliability,
Fast response,
High precision.
Applications:
Intelligent low-voltage power distribution system;
DC power screen, box substation;
Temperature and fire monitoring for transformer, fire monitoring for cable;
High-voltage switchgear fiber optic temperature measurement system;
Transformer contact monitoring.
Pictures of Company
| Advantages of Hall Effect Current Sensor | ||
| Current Transformer | Hall Effect Current Sensor | |
| Functionality | Generally, only the AC current is enlarged or reduced according to a certain ratio. The functions are relatively single. | DC and AC can be fully compatible. It can measure AC and DC currents and output industry standard signals. |
| Safety | If the measured current suddenly increases, the induced current will often increase sharply, which will cause the collected instrument to burn out due to large current. | Generally resistant to 120% FS, even if there is a sudden large current, because the input and output are isolated from each other, the safety of the instrument can still be guaranteed. |
Caution:
1. Pay attention to the auxiliary power information, especially the auxiliary power grade, and polarity, other wise will damage the product.
2. Pay attention to the wire connection; wrong terminal connection will cause malfunction of the product and even damage the product;
3. Don't dismantle the product, and carry with care to avoid bump and fall of the product;
4. If the product has been using under the environment with strong magnetic field interference, please pay attention to the shield of input wire, and the output signal wire should be as short as possible. For product intensive installation, the space between each product should not be smaller than 10mm.
5. Only use identified terminals.
6. There is no lightening strike prevention circuit design in this product. For out door and hazardous environment using, please add protective alternatives.
7. This product uses fire prevent ABS crust, and its temperature withstand is only limited as +85℃, higher than this limitation will cause the product deformation. Please use and store carefully.
Hot Tags: hall effect ac/dc current transducer, China, suppliers, factory, price, DC Voltage Transducer 4 20mA Analog Output, MYWE DC Voltage Sensor Analog Output, Power Monitoring Equipment Current Switch, Motor Operation Monitoring System, Signal Converter, Power Supply 24V
