WBV332U05-S(DC Voltage Sensor Arduino 25V with Analog Output) converts DC input pure voltage into a load independent output signal DC 0~5V or 0-10V.
Advantages:
Strong overload capability,
High reliability,
Fast response,
High precision.
Applications:
Suitable for the current measuring,
Automatic monitoring and control,
Electrical signal detection and modulation,
Data acquisition.
1. The product has calibrated before out of factory. After correctly wiring, it can be powered and used immediately. But for further precise signal sampling, user needs to warm-up the product for 3 minutes before use.
a) The auxiliary power requires isolation voltage≥2000VAC, DC current output ripple＜10mV, and multiple converters can share with one set auxiliary power together.
b) Output signal (Iz) is designed to follow the impedance load value of 250Ω; When Resistance (R1 ) is less than 100Ω, the user must add output current circuit a power reduced resistance load R0 to keep the summation of total impedance value is between 100Ω～250Ω
2. The Maximum volume of line for the transducer terminal is 2.5mm2; the insulation layer of the line should be peeled off about 8mm～10mm and tightly twisted to connect with the transducer terminals.
3. For the less than 10A AC current measurement, it may adopt ampere-turn method for input and for this time, the resolution of the transducer increases and measuring range narrows, but other technical index may not be affected.
Hot Tags: Voltage Sensor Arduino 25V with Analog Output , China, suppliers, factory, price, DC Voltage Transducer 4 20mA Analog Output, Voltage Sensor, High Voltage High Isolation Voltage Transducer, CE Certification, DC Voltage Sensor Module 010V, DC Voltage Transducer With Analog Output
