WBI414F23(AC Current Transducer 4-20mA) converts AC input current into output signal DC 4-20mA. It has adopted electromagnetic isolation principle for real time measurement of AC current from electric net or electric circuit.
Our Commitment
• BETTER PRICE than other sellers for you because of Factory Direct Sale.
• BETTER QUALITY than before caused by our nearly 20 years trading experience.
• FAST DELIVERY always made by our GROUP's Enthusiasm.
• TIMING REPLY in 24 hours all about our TEAM's Passion & Patience.
| How to choose current sensor | |||||||||
| 1. Determine AC or DC. | |||||||||
| 2. Determine the detection current: 1mA, 5mA, 20mA, 75mA, 0.2A, 0.5A, 1A, 2A, 5A, 10A, 15A, 20A, 30A, 50A, 100A, 200A, 300A, 400A, etc. | |||||||||
| 3. Determine the output signal: 0-5V, 0-10V, 1-5V, 1-10V, 4-20mA, 0-20mA, etc. | |||||||||
| 4. Confirm the auxiliary power: DC 12V, 24V, 9V-36V, 85V-265V (Default 24V power supply, special user specified) |
Caution:
1. Pay attention to the auxiliary power information, especially the auxiliary power grade, and polarity, other wise will damage the product.
2. Pay attention to the wire connection; wrong terminal connection will cause malfunction of the product and even damage the product;
3. Don’t dismantle the product, and carry with care to avoiding bump and fall of the product;
4. If the product has been using under the environment with strong magnetic field interference, please pay attention to the shield of input wire, and the output signal wire should be as short as possible. For product intensive installation, the space between each product should not be smaller than 10mm.
5. Only use identified terminals.
Hot Tags: ac current transducer 4-20ma, China, suppliers, factory, price, AC Current Monitor Current Transducer 100A, True RMS Analog Output Current Transducer, Current Sensor, High Accuracy, 10A Anti interference Active Current Sensor, 50 500A Input Current Transducer Arduino
Attribute for AC Current Transducer 4-20mA:
1. Input: AC 0~30A…0~400A
2. Output: DC 4-20mA
3. Frequency range: 25Hz～5kHz
4. Accuracy: 0.5%
5. Input impedance (R): approximate zero
6. Linear range:0-120% of nominal input
7. Responding time: 300ms
8. Over load capacity: 30 times of nominal input, for 5 seconds
9. Output impedance: 6V
10. Static current: 3.3mA(0mA-20mA)
6.8mA(4mA-20mA)
11. Auxiliary power: DC +12V/+24V
12. Isolation voltage(Input/Output): ≥2500Vdc, for 1 minute
13. Output ripple: ＜6mV
14. Drifting by temperature: 3.5×10-4/℃
15. Ambient temperature: -10℃～+50℃
16. Mounting : DIN rail 35mm mount or screw mount
