Description

Technical Parameters

The WBI023TK03-40 current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method ,with a galvanic isolation between primary and secondary circuit, the size of primary not affect test precision, no matter the location of primary in the hole of current sensor. It can really measure resolution 1000:1 and it uses for precision measurement of DC, AC and pulse current.

Electrical data(Ta=25℃±5℃)

Parameter/Type	WBI023TK03-40	Unit
Rated input Ipn)	10-1000	A
Measure range(Ip)	2000	A
Coil resister	@ 85℃；47	Ω
Measure resister	with±15V，@±1000Amax，0(min)，20(max)	Ω
	with±15V，@±1200Amax，0(min)，7.5(max)	Ω
	with±24V，@±1000Amax，0(min)，65(max)	Ω
	with±24V，@±2000Amax，0(min)，7.5(max)	Ω
Turns ratio(Np/Ns)	1:5000	T
Rated output (Isn)	2±0.1%FS(10A), 200±0.1%FS(1000A)	mA
Supply voltage	±15～± 24	V
Power consumption	≤20+IpX(Np/Ns)	mA
Zero offset	@Ip=0，≤±0.2	mA
Offset drift	@ -40℃～85℃，≤±0.5	mA
Response time	@100A/ μS,10%-90%，＜1	µs
Linearity	@Ip=0- ±Ipn，≤0.05	%FS
Galvanic isolation	@ 50HZ, AC, 1min，6	KV
Di/dt accurately followed	＞100	A/µs
Bandwidth	@ -3dB，DC…150	KHz