WBT1C1CU05 uses linear photoelectric isolation technology to isolate and transmit 4mA to 20mA DC current signals. The input, two output and auxiliary power supply of this product are electrically isolated from each other, featuring high accuracy, high isolation, low drift and low power consumption. It solves the common mode interference in the signal transmission process of sensors or instruments, overcomes the problems of ground loop interference and strong electric interference caused by the scattered transmission signal, and is especially suitable for sensors/transmitters and meters that need to be electrically isolated.
Hot Tags: One Channel 4-20mA Input Signal Conditioner, China, suppliers, factory, price, 4 20mA Current Signal Conditioner in stock, Power Monitoring Equipment Current Switch, , 10V 1000V Input AC Voltage Monitoring Switch, 4 20mA Current Signal Conditioner
1. Input range: One Channel DC 4mA～20mA;
2. Output range: One channel DC 4mA～20mA;
3. Accuracy level: 0.5;
4. Equivalent input impedance:
about 300Ω for power supply 12V DC;
about 500Ω for power supply 24V DC
5. Linear range: 0% to 120% of nominal input;
6. Response time: 120ms;
7. Overload capability: 2 times the nominal input current for 5s;
8. Maximum load capacity: about 500Ω;
9. Auxiliary power supply: 12V DC or 24V DC;
10. Static current: 30mA;
11. Isolation withstand voltage:
>DC 1kV, 1min between input and output,
>DC 1kV, 1min between power supply and output,
>DC 1kV, 1min between power supply and input;
12. Output ripple: <10mV ;
13. Temperature drift: 150 × 10-6 / ° C;
14. Ambient temperature: 0 ° C ~ 50 ° C.
