WBV342U01-S(1000V Input Voltage Transducer Low Power) converts pure DC input voltage into a load independent output signal DC voltage 0-5V or 0~10V.
1000V Input Voltage Transducer Low Power has adopted modulation-demodulation isolation principle and average measurement method for real time measurement of DC voltage from power grid and circuit.
1000V Input Voltage Transducer Low Power has certain advantages of total galvanic isolation between input/output, high accuracy, low drifting by temperature, and wide temperature bearable range, etc.
Hot Tags: 1000V Input Voltage Transducer Low Power, China, suppliers, factory, price, 3 Phase 4 Wire, DC Voltage Sensor Module 010V, Voltage Sensor, Signal Conditioners, MYWE DC Voltage Sensor Analog Output, 10mV 1000V Input
Key Technical Data:
Rated input voltage | 10mV, 50mV, 75mV, 5V, 50V, 75V, 150V, 200V, 300V, 400V, 500V, 750V, 1000V DC |
Output signals | 0-5V ,0-10V DC |
Accuracy | 0.2% |
Input impedance | approximate zero |
Responding time | 350ms |
Linear measuring range | 0 - 1.2 times of rated input current |
Over load capacity | 30 times of rated input current, 5s |
Static current | 30mA |
Power supply | +12V, +24VDC |
Isolation voltage | ≥2500V DC, for 1 minute |
Thermal drift | 200ppm/°C |
Ambient temperature | -25℃～+70℃ |
Mounting type | DIN rail 35mm mount or screw mount |
Material of shell | ABS (According to UL94V-0) |
Protection of shell | IP20 |
Protection class | Surge: 2kV; Electrostatic discharge: 6kV/8kV; Electrical fast transient burst: 2kV. |
MTBF | >50000h |
Weight | 90g |
